FTP Operation Attributes. More...

Data Structures
struct	globus_i_ftp_client_range_t
	Byte range report.This structure contains information about a single extent of data stored on an FTP server. A report structure is generated from each part of an extended-block mode restart marker message from an FTP server. More...

Typedefs
typedef struct globus_i_ftp_client_operationattr_t *	globus_ftp_client_operationattr_t
	Operation Attributes.FTP Client attributes are used to control the parameters needed to access an URL using the FTP protocol. Attributes are created and manipulated using the functions in the attributes section of the library. More...

Functions
globus_result_t	globus_ftp_client_operationattr_init (globus_ftp_client_operationattr_t *attr)

globus_result_t	globus_ftp_client_operationattr_destroy (globus_ftp_client_operationattr_t *attr)

globus_result_t	globus_ftp_client_operationattr_set_delayed_pasv (const globus_ftp_client_operationattr_t *attr, globus_bool_t delayed_pasv)

globus_result_t	globus_ftp_client_operationattr_copy (globus_ftp_client_operationattr_t dst, const globus_ftp_client_operationattr_t src)

Storage Module
globus_result_t	globus_ftp_client_operationattr_set_storage_module (globus_ftp_client_operationattr_t attr, const char module_name, const char *module_args)

globus_result_t	globus_ftp_client_operationattr_get_storage_module (const globus_ftp_client_operationattr_t attr, char module_name, char *module_args)

Custom Data Channel Driver Stack
globus_result_t	globus_ftp_client_operationattr_set_net_stack (globus_ftp_client_operationattr_t attr, const char driver_list)

globus_result_t	globus_ftp_client_operationattr_get_net_stack (const globus_ftp_client_operationattr_t attr, char *driver_list)

Custom Server File Driver Stack
globus_result_t	globus_ftp_client_operationattr_set_disk_stack (globus_ftp_client_operationattr_t attr, const char driver_list)

globus_result_t	globus_ftp_client_operationattr_get_disk_stack (const globus_ftp_client_operationattr_t attr, char *driver_list)

Parallelism
globus_result_t	globus_ftp_client_operationattr_set_parallelism (globus_ftp_client_operationattr_t attr, const globus_ftp_control_parallelism_t parallelism)

globus_result_t	globus_ftp_client_operationattr_get_parallelism (const globus_ftp_client_operationattr_t attr, globus_ftp_control_parallelism_t parallelism)

allocate
globus_result_t	globus_ftp_client_operationattr_set_allocate (globus_ftp_client_operationattr_t *attr, const globus_off_t allocated_size)

globus_result_t	globus_ftp_client_operationattr_get_allocate (const globus_ftp_client_operationattr_t attr, globus_off_t allocated_size)

authz_assert
globus_result_t	globus_ftp_client_operationattr_set_authz_assert (globus_ftp_client_operationattr_t attr, const char authz_assert, globus_bool_t cache_authz_assert)

globus_result_t	globus_ftp_client_operationattr_get_authz_assert (const globus_ftp_client_operationattr_t attr, char authz_assert, globus_bool_t cache_authz_assert)

Striped Data Movement
globus_result_t	globus_ftp_client_operationattr_set_striped (globus_ftp_client_operationattr_t *attr, globus_bool_t striped)

globus_result_t	globus_ftp_client_operationattr_get_striped (const globus_ftp_client_operationattr_t attr, globus_bool_t striped)

Striped File Layout
globus_result_t	globus_ftp_client_operationattr_set_layout (globus_ftp_client_operationattr_t attr, const globus_ftp_control_layout_t layout)

globus_result_t	globus_ftp_client_operationattr_get_layout (const globus_ftp_client_operationattr_t attr, globus_ftp_control_layout_t layout)

TCP Buffer
globus_result_t	globus_ftp_client_operationattr_set_tcp_buffer (globus_ftp_client_operationattr_t attr, const globus_ftp_control_tcpbuffer_t tcp_buffer)

globus_result_t	globus_ftp_client_operationattr_get_tcp_buffer (const globus_ftp_client_operationattr_t attr, globus_ftp_control_tcpbuffer_t tcp_buffer)

File Type
globus_result_t	globus_ftp_client_operationattr_set_type (globus_ftp_client_operationattr_t *attr, globus_ftp_control_type_t type)

globus_result_t	globus_ftp_client_operationattr_get_type (const globus_ftp_client_operationattr_t attr, globus_ftp_control_type_t type)

Transfer Mode
globus_result_t	globus_ftp_client_operationattr_set_mode (globus_ftp_client_operationattr_t *attr, globus_ftp_control_mode_t mode)

globus_result_t	globus_ftp_client_operationattr_get_mode (const globus_ftp_client_operationattr_t attr, globus_ftp_control_mode_t mode)

globus_result_t	globus_ftp_client_operationattr_set_list_uses_data_mode (const globus_ftp_client_operationattr_t *attr, globus_bool_t list_uses_data_mode)

Authorization
globus_result_t	globus_ftp_client_operationattr_set_authorization (globus_ftp_client_operationattr_t attr, gss_cred_id_t credential, const char user, const char password, const char account, const char *subject)

globus_result_t	globus_ftp_client_operationattr_get_authorization (const globus_ftp_client_operationattr_t attr, gss_cred_id_t credential, char user, char password, char account, char subject)

Data Channel Authentication
globus_result_t	globus_ftp_client_operationattr_set_dcau (globus_ftp_client_operationattr_t attr, const globus_ftp_control_dcau_t dcau)

globus_result_t	globus_ftp_client_operationattr_get_dcau (const globus_ftp_client_operationattr_t attr, globus_ftp_control_dcau_t dcau)

Data Channel Protection
globus_result_t	globus_ftp_client_operationattr_set_data_protection (globus_ftp_client_operationattr_t *attr, globus_ftp_control_protection_t protection)

globus_result_t	globus_ftp_client_operationattr_get_data_protection (const globus_ftp_client_operationattr_t attr, globus_ftp_control_protection_t protection)

Data Channel Security Context
globus_result_t	globus_ftp_client_operationattr_set_data_security (globus_ftp_client_operationattr_t attr, int type, void credential)

globus_result_t	globus_ftp_client_operationattr_get_data_security (const globus_ftp_client_operationattr_t attr, int type, void **credential)

Control Channel Protection
globus_result_t	globus_ftp_client_operationattr_set_control_protection (globus_ftp_client_operationattr_t *attr, globus_ftp_control_protection_t protection)

globus_result_t	globus_ftp_client_operationattr_get_control_protection (const globus_ftp_client_operationattr_t attr, globus_ftp_control_protection_t protection)

Append
globus_result_t	globus_ftp_client_operationattr_set_append (globus_ftp_client_operationattr_t *attr, globus_bool_t append)

globus_result_t	globus_ftp_client_operationattr_get_append (const globus_ftp_client_operationattr_t attr, globus_bool_t append)

IPv6
globus_result_t	globus_ftp_client_operationattr_set_allow_ipv6 (globus_ftp_client_operationattr_t *attr, globus_bool_t allow_ipv6)

globus_result_t	globus_ftp_client_operationattr_get_allow_ipv6 (const globus_ftp_client_operationattr_t attr, globus_bool_t allow_ipv6)

Read into a Single Buffer
globus_result_t	globus_ftp_client_operationattr_set_read_all (globus_ftp_client_operationattr_t attr, globus_bool_t read_all, globus_ftp_client_data_callback_t intermediate_callback, void intermediate_callback_arg)

globus_result_t	globus_ftp_client_operationattr_get_read_all (const globus_ftp_client_operationattr_t attr, globus_bool_t read_all, globus_ftp_client_data_callback_t intermediate_callback, void *intermediate_callback_arg)

Detailed Description

FTP Operation Attributes.

Operation attributes are used to control the security and performance of an FTP operation. These features are often dependent on the capabilities of the FTP server which you are going to access.

Typedef Documentation

◆ globus_ftp_client_operationattr_t

typedef struct globus_i_ftp_client_operationattr_t* globus_ftp_client_operationattr_t

Operation Attributes.FTP Client attributes are used to control the parameters needed to access an URL using the FTP protocol. Attributes are created and manipulated using the functions in the attributes section of the library.

See also: globus_ftp_client_operationattr_init(), globus_ftp_client_operationattr_destroy()

Function Documentation

◆ globus_ftp_client_operationattr_copy()

globus_result_t globus_ftp_client_operationattr_copy	(	globus_ftp_client_operationattr_t *	dst,
		const globus_ftp_client_operationattr_t *	src
	)

Create a duplicate of an attribute set.

The duplicated attribute set has a deep copy of all data in the attribute set, so the original may be destroyed, while the copy is still valid.

Parameters

dst	The attribute set to be initialized to the same values as src.
src	The original attribute set to duplicate.

◆ globus_ftp_client_operationattr_destroy()

globus_result_t globus_ftp_client_operationattr_destroy ( globus_ftp_client_operationattr_t * attr )

Destroy an FTP client attribute set.

Parameters

attr	A pointer to the attribute to destroy.

◆ globus_ftp_client_operationattr_init()

globus_result_t globus_ftp_client_operationattr_init ( globus_ftp_client_operationattr_t * attr )

Initialize an FTP client attribute set.

Parameters

attr	A pointer to the new attribute set.

◆ globus_ftp_client_operationattr_set_allocate()

globus_result_t globus_ftp_client_operationattr_set_allocate	(	globus_ftp_client_operationattr_t *	attr,
		const globus_off_t	allocated_size
	)

Set/Get the allocate attribute for an ftp client attribute set.

This attribute lets the user set a size to be passed to the server before a put operation.

This attribute is ignored for get operations.

Parameters

attr	The attribute set to query or modify.
allocated_size	The size to direct server to allocate.

◆ globus_ftp_client_operationattr_set_allow_ipv6()

globus_result_t globus_ftp_client_operationattr_set_allow_ipv6	(	globus_ftp_client_operationattr_t *	attr,
		globus_bool_t	allow_ipv6
	)

Set/Get the allow ipv6 attribute for an ftp client attribute set.

This attribute allows client library to make use of ipv6 when possible.

Use of this is currently very experimental.

Parameters

attr	The attribute set to query or modify.
allow_ipv6	GLOBUS_TRUE to allow ipv6 or GLOBUS_FALSE to disallow(default)

◆ globus_ftp_client_operationattr_set_append()

globus_result_t globus_ftp_client_operationattr_set_append	(	globus_ftp_client_operationattr_t *	attr,
		globus_bool_t	append
	)

Set/Get the append attribute for an ftp client attribute set.

This attribute allows the user to append to a file on an FTP server, instead of replacing the existing file when doing a globus_ftp_client_put() or globus_ftp_client_transfer().

This attribute is ignored on the retrieving side of a transfer, or a globus_ftp_client_get().

Parameters

attr	The attribute set to query or modify.
append	The value of append attribute.

◆ globus_ftp_client_operationattr_set_authorization()

globus_result_t globus_ftp_client_operationattr_set_authorization	(	globus_ftp_client_operationattr_t *	attr,
		gss_cred_id_t	credential,
		const char *	user,
		const char *	password,
		const char *	account,
		const char *	subject
	)

Set/Get the authorization attribute for an ftp client attribute set.

This attribute allows the user to pass authentication information to the ftp client library. This information is used to authenticate with the ftp server.

The Globus FTP client library supports authentication using either the GSSAPI, or standard plaintext username and passwords. The type of authentication is determined by the URL scheme which is used for the individual get, put, or 3rd party transfer calls.

Parameters

attr	The attribute set to query or modify.
credential	The credential to use for authenticating with a GSIFTP server. This may be GSS_C_NO_CREDENTIAL to use the default credential.
user	The user name to send to the FTP server. When doing a gsiftp transfer, this may be set to NULL, and the default globusmap entry for the user's GSI identity will be usd.
password	The password to send to the FTP server. When doing a gsiftp transfer, this may be set to NULL.
account	The account to use for the data transfer. Most FTP servers do not require this.
subject	The subject name of the FTP server. This is only used when doing a gsiftp transfer, and then only when the security subject name does not match the hostname of the server (ie, when the server is being run by a user).

◆ globus_ftp_client_operationattr_set_authz_assert()

globus_result_t globus_ftp_client_operationattr_set_authz_assert	(	globus_ftp_client_operationattr_t *	attr,
		const char *	authz_assert,
		globus_bool_t	cache_authz_assert
	)

Set/Get the authz_assert attribute for an ftp client attribute set.

This attribute lets the user set an AUTHORIZATION assertion to be passed to the server

Parameters

attr	The attribute set to query or modify.
authz_assert	The AUTHORIZATION assertion.
cache_authz_assert	Boolean that specifies whether to cache this assertion for subsequent operations

◆ globus_ftp_client_operationattr_set_control_protection()

globus_result_t globus_ftp_client_operationattr_set_control_protection	(	globus_ftp_client_operationattr_t *	attr,
		globus_ftp_control_protection_t	protection
	)

Set/Get the control channel protection attribute for an ftp client attribute set.

The control channel protection attribute allows the user to decide whether to encrypt or integrity check the command session between the client and the FTP server. This attribute is only relevant if used with a gsiftp URL.

Parameters

attr	The attribute set to query or modify.
protection	The value of control channel protection attribute.

Note: The clear and safe protection levels are treated identically, with the client integrity checking all commands. The confidential and private protection levels are treated identically, with the client encrypting all commands.

◆ globus_ftp_client_operationattr_set_data_protection()

globus_result_t globus_ftp_client_operationattr_set_data_protection	(	globus_ftp_client_operationattr_t *	attr,
		globus_ftp_control_protection_t	protection
	)

Set/Get the data channel protection attribute for an ftp client attribute set.

Parameters

attr	The attribute set to query or modify.
protection	The value of data channel protection attribute.

Note: Only safe and private protection levels are supported by gsiftp.

◆ globus_ftp_client_operationattr_set_data_security()

globus_result_t globus_ftp_client_operationattr_set_data_security	(	globus_ftp_client_operationattr_t *	attr,
		int	type,
		void *	credential
	)

Set/Get the data channel security context type and credential.

Parameters

attr	The attribute set to query or modify.
type	The type of credential. Currently only 'P' is supported, and requires a gss_cred_id_t for the credential.
credential	A credential appropriate for the type specified.

◆ globus_ftp_client_operationattr_set_dcau()

globus_result_t globus_ftp_client_operationattr_set_dcau	(	globus_ftp_client_operationattr_t *	attr,
		const globus_ftp_control_dcau_t *	dcau
	)

Set/Get the data channel authentication attribute for an ftp client attribute set.

Data channel authentication is a GridFTP extension, and may not be supported by all servers. If a server supports it, then the default is to delegate a credential to the server, and authenticate all data channels with that delegated credential.

Parameters

attr	The attribute set to query or modify.
dcau	The value of data channel authentication attribute.

◆ globus_ftp_client_operationattr_set_delayed_pasv()

globus_result_t globus_ftp_client_operationattr_set_delayed_pasv	(	const globus_ftp_client_operationattr_t *	attr,
		globus_bool_t	delayed_pasv
	)

Set/Get whether or not delayed passive should be used

This attribute allows the user to enable delayed passive so the server can provide the passive address after it knows the filename to be transferred.

Parameters

attr	The attribute set to query or modify.
delayed_pasv	globus_bool_t

Note: Delayed passive is a GridFTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_disk_stack()

globus_result_t globus_ftp_client_operationattr_set_disk_stack	(	globus_ftp_client_operationattr_t *	attr,
		const char *	driver_list
	)

Set/Get the gridftp xio driver stack used for the file storage.

This attribute allows the user to control which xio drivers will be used for file DSI only. This is an experimental feature of the gridftp server. Only works for third party transfers.

Parameters

attr	The attribute set to query or modify.
driver_list	driver list in the following format: driver1[:driver1opts][,driver2[:driver2opts]][...]. The string "default" will reset the stack list to the server default.

Note: This is a GridFTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_layout()

globus_result_t globus_ftp_client_operationattr_set_layout	(	globus_ftp_client_operationattr_t *	attr,
		const globus_ftp_control_layout_t *	layout
	)

Set/Get the layout attribute for an ftp client attribute set.

This attribute allows the user to control the layout of a file being transferred to a striped Grid-FTP server. The striping layout defines what regions of a file will be stored on each stripe of a multiple-striped ftp server.

The layout attribute is used only when the data is being stored on the server (on a put or 3rd party transfer). This attribute is ignored for stream mode data transfers.

Parameters

attr	The attribute set to query or modify.
layout	The value of layout attribute.

See also: #globus_ftp_control_layout_t, globus_ftp_client_operationattr_set_parallelism(), globus_ftp_client_operationattr_set_mode()

Note: This is a Grid-FTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_list_uses_data_mode()

globus_result_t globus_ftp_client_operationattr_set_list_uses_data_mode	(	const globus_ftp_client_operationattr_t *	attr,
		globus_bool_t	list_uses_data_mode
	)

Set/Get whether or not list data will use the current data mode

This attribute allows the user to allow list data to be transferred using the current data channel mode.

Parameters

attr	The attribute set to query or modify.
list_uses_data_mode	globus_bool_t

Note: List data transfers in nonstandard modes is a Grid-FTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_mode()

globus_result_t globus_ftp_client_operationattr_set_mode	(	globus_ftp_client_operationattr_t *	attr,
		globus_ftp_control_mode_t	mode
	)

Set/Get the file transfer mode attribute for an ftp client attribute set.

This attribute allows the user to choose the data channel protocol used to transfer a file. There are two modes supported by this library: stream mode and extended block mode.

Stream mode is a file transfer mode where all data is sent over a single TCP socket, without any data framing. In stream mode, data will arrive in sequential order. This mode is supported by nearly all FTP servers.

Extended block mode is a file transfer mode where data can be sent over multiple parallel connections and to multiple data storage nodes to provide a high-performance data transfer. In extended block mode, data may arrive out-of-order. ASCII type files are not supported in extended block mode.

Parameters

attr	The attribute set to query or modify.
mode	The value of mode attribute

See also: globus_ftp_control_mode_t, globus_ftp_client_operationattr_set_parallelism(), globus_ftp_client_operationattr_set_layout()

Note: Extended block mode is a Grid-FTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_net_stack()

globus_result_t globus_ftp_client_operationattr_set_net_stack	(	globus_ftp_client_operationattr_t *	attr,
		const char *	driver_list
	)

Set/Get the gridftp xio driver stack used for the data channel.

This attribute allows the user to control which xio drivers will be used for data transport. The driver MUST be installed and allowed by the server or the transfer/get/put will result in an error.

Parameters

attr	The attribute set to query or modify.
driver_list	driver list in the following format: driver1[:driver1opts][,driver2[:driver2opts]][...]. The string "default" will reset the stack list to the server default.

Note: This is a GridFTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_parallelism()

globus_result_t globus_ftp_client_operationattr_set_parallelism	(	globus_ftp_client_operationattr_t *	attr,
		const globus_ftp_control_parallelism_t *	parallelism
	)

Set/Get the parallelism attribute for an ftp client attribute set.

This attribute allows the user to control the level of parallelism to be used on an extended block mode file transfer. Currently, only a "fixed" parallelism level is supported. This is interpreted by the FTP server as the number of parallel data connections to be allowed for each stripe of data. Currently, only the "fixed" parallelism type is

This attribute is ignored in stream mode.

Parameters

attr	The attribute set to query or modify.
parallelism	The value of parallelism attribute.

See also: #globus_gsiftp_control_parallelism_t, globus_ftp_client_operationattr_set_layout(), globus_ftp_client_operationattr_set_mode()

Note: This is a Grid-FTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_read_all()

globus_result_t globus_ftp_client_operationattr_set_read_all	(	globus_ftp_client_operationattr_t *	attr,
		globus_bool_t	read_all,
		globus_ftp_client_data_callback_t	intermediate_callback,
		void *	intermediate_callback_arg
	)

Set/Get the read_all attribute for an ftp client attribute set.

This attribute allows the user to pass in a single buffer to receive all of the data for the current transfer. This buffer must be large enough to hold all of the data for the transfer. Only one buffer may be registered with globus_ftp_client_register_read() when this attribute is used for a get.

In extended block mode, this attribute will cause data to be stored directly into the buffer from multiple streams without any extra data copies.

If the user sets the intermediate callback to a non-null value, this function will be called whenever an intermediate sub-section of the data is received into the buffer.

This attribute is ignored for globus_ftp_client_put() or globus_ftp_client_third_party_transfer() operations.

Parameters

attr	The attribute set to query or modify.
read_all	The value of read_all attribute.
intermediate_callback	Callback to be invoked when a subsection of the data has been retreived. This callback may be GLOBUS_NULL, if the user only wants to be notified when the data transfer is completed.
intermediate_callback_arg	User data to be passed to the intermediate callback function.

◆ globus_ftp_client_operationattr_set_storage_module()

globus_result_t globus_ftp_client_operationattr_set_storage_module	(	globus_ftp_client_operationattr_t *	attr,
		const char *	module_name,
		const char *	module_args
	)

Set/Get the gridftp storage module (DSI).

This attribute allows the user to control what backend module they use with the gridftp server. The module MUST be implemented by the server or the transfer/get/put will result in an error.

This attribute is ignored in stream mode.

Parameters

attr	The attribute set to query or modify.
module_name	The backend storage module name
module_args	The backend storage module parameters

@see #globus_gsiftp_control_parallelism_t, globus_ftp_client_operationattr_set_layout(), globus_ftp_client_operationattr_set_mode()

Note: This is a Grid-FTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_striped()

globus_result_t globus_ftp_client_operationattr_set_striped	(	globus_ftp_client_operationattr_t *	attr,
		globus_bool_t	striped
	)

Set/Get the striped attribute for an ftp client attribute set.

This attribute allows the user to force the client library to used the FTP commands to do a striped data transfer, even when the user has not requested a specific file layout via the layout attribute. This is useful when transferring files between servers which use the server side processing commands ERET or ESTO to transform data and send it to particular stripes on the destination server.

The layout attribute is used only when the data is being stored the server (on a put or 3rd party transfer). This attribute is ignored for stream mode data transfers.

Parameters

attr	The attribute set to query or modify.
striped	The value of striped attribute.

See also: globus_ftp_client_operationattr_set_parallelism(), globus_ftp_client_operationattr_set_layout() globus_ftp_client_operationattr_set_mode()

Note: This is a Grid-FTP extension, and may not be supported on all FTP servers.

◆ globus_ftp_client_operationattr_set_tcp_buffer()

globus_result_t globus_ftp_client_operationattr_set_tcp_buffer	(	globus_ftp_client_operationattr_t *	attr,
		const globus_ftp_control_tcpbuffer_t *	tcp_buffer
	)

Set/Get the TCP buffer attribute for an ftp client attribute set.

This attribute allows the user to control the TCP buffer size used for all data channels used in a file transfer. The size of the TCP buffer can make a significant impact on the performance of a file transfer. The user may set the buffer to either a system-dependent default value, or to a fixed value.

The actual implementation of this attribute is designed to be as widely interoperable as possible. In addition to supporting the SBUF command described in the GridFTP protocol extensions document, it also supports other commands and site commands which are used by other servers to set TCP buffer sizes. These are

SITE RETRBUFSIZE
SITE RBUFSZ
SITE RBUFSIZ
SITE STORBUFIZE
SITE SBUFSZ
SITE SBUFSIZ
SITE BUFSIZE

This attribute is affects any type of data transfer done with the ftp client library.

Parameters

attr	The attribute set to query or modify.
tcp_buffer	The value of tcp_buffer attribute.

@see globus_ftp_control_tcpbuffer_t

◆ globus_ftp_client_operationattr_set_type()

globus_result_t globus_ftp_client_operationattr_set_type	(	globus_ftp_client_operationattr_t *	attr,
		globus_ftp_control_type_t	type
	)

Set/Get the file representation type attribute for an ftp client attribute set.

This attribute allows the user to choose the file type used for an FTP file transfer. The file may be transferred as either ASCII or a binary image.

When transferring an ASCII file, the data will be transformed in the following way

the high-order bit will be set to zero
end-of line characters will be converted to a CRLF pair for the data transfer, and then converted to native format before being returned to the user's data callbacks.

The default type for the ftp client library is binary.

Parameters

attr	The attribute set to query or modify.
type	The value of type attribute.

@see globus_ftp_control_type_t

Data Structures

Typedefs

Functions

Storage Module

Custom Data Channel Driver Stack

Custom Server File Driver Stack

Parallelism

allocate

authz_assert

Striped Data Movement

Striped File Layout

TCP Buffer

File Type

Transfer Mode

Authorization

Data Channel Authentication

Data Channel Protection

Data Channel Security Context

Control Channel Protection

Append

IPv6

Read into a Single Buffer

Detailed Description

Typedef Documentation

◆ globus_ftp_client_operationattr_t

Function Documentation

◆ globus_ftp_client_operationattr_copy()

◆ globus_ftp_client_operationattr_destroy()

◆ globus_ftp_client_operationattr_init()

◆ globus_ftp_client_operationattr_set_allocate()

◆ globus_ftp_client_operationattr_set_allow_ipv6()

◆ globus_ftp_client_operationattr_set_append()

◆ globus_ftp_client_operationattr_set_authorization()

◆ globus_ftp_client_operationattr_set_authz_assert()

◆ globus_ftp_client_operationattr_set_control_protection()

◆ globus_ftp_client_operationattr_set_data_protection()

◆ globus_ftp_client_operationattr_set_data_security()

◆ globus_ftp_client_operationattr_set_dcau()

◆ globus_ftp_client_operationattr_set_delayed_pasv()

◆ globus_ftp_client_operationattr_set_disk_stack()

◆ globus_ftp_client_operationattr_set_layout()

◆ globus_ftp_client_operationattr_set_list_uses_data_mode()

◆ globus_ftp_client_operationattr_set_mode()

◆ globus_ftp_client_operationattr_set_net_stack()

◆ globus_ftp_client_operationattr_set_parallelism()

◆ globus_ftp_client_operationattr_set_read_all()

◆ globus_ftp_client_operationattr_set_storage_module()

◆ globus_ftp_client_operationattr_set_striped()

◆ globus_ftp_client_operationattr_set_tcp_buffer()

◆ globus_ftp_client_operationattr_set_type()